單片防火玻璃**特色：

1. 單片成型，透視性**—一般防火玻璃為雙片以上成型，透視差。
2. 耐高溫，不炸裂——在1000C高溫下可堅持90—120分鐘不炸裂。
3. 增加外幕墻的防火功能—耐火性能良好，強度提高，可以應用于現代幕墻建筑中。
4. 限制火災的范圍—避免火勢的蔓延，抵御火焰及煙霧的侵入。
5. 強度上更勝一籌—同樣的厚度下，是浮法玻璃的6-12倍，是鋼化玻璃2-3倍以上。
6. 紫外線照射下不發生變化—化學灌漿或夾層防火玻璃很快變成乳白色或產生氣泡。
7. 重量較輕—在保證強度的條件下，與鋼化玻璃相比，可以減少玻璃的重量。
8. 適應建筑設計的要求—在同樣的風壓下，能采用較薄的厚度或較大的面積設計。
9. 易于安裝—安裝方法簡單，同鋼化玻璃接近。
10節省造價—新技術，新工藝，高質量，價格遠低于進口同類產品。

Ten fire-resistant glass chip features:

1. Monolithic shape, perspective of the good - generally more fire-resistant glass for the two-piece molding, perspective difference.

2. Heat, not burst - 1000C high temperature may be maintained at 90-120 minutes did not burst.

3. To increase the fire safety features outside the walls - a good fire resistance, strength, can be applied to modern curtain wall buildings.

4. Limit the scope of the fire - to avoid the spread of fire, to resist intrusion of flame and smoke.

5. Intensity superior - the same thickness is 6-12 times that of float glass, tempered glass is 2-3 times more.

6. UV irradiation does not change - chemical grouting or laminated glass, fire or air bubbles will soon become milky white.

7. Lighter - in ensuring the strength of the condition, compared with the tempered glass can reduce the weight of the glass.

8. Meet the requirements of architectural design - under the same pressure, the thickness can be thinner or larger by the area of design.

9. Easy to install - installation method is simple, with the glass close.

10 Cost savings - new technologies, new technology, quality, price much lower than imported products